1112.12 SIGN AREA.

   (a)   Applicability. These standards are applicable to signs permitted in Section 1112.10 - Permanent Sign Permitted by Zoning District.

   (b)   Total Sign Area. The total area of all signs erected on the lot and building of any single business shall be within the allowable square footages described in the table below:

TABLE 1112.12 SQUARE FOOTAGE ALLOWANCES
SIGN TYPE	MAXIMUM TOTAL PERMITTED SIGN AREA
Freestanding Sign	•   a freestanding sign setback 75 70 feet or less from a public right-of-way shall not be larger than 40 square feet. •   a freestanding sign setback greater than 7075 feet from a public right-of-way shall not be larger than 50 square feet. •   in districts where a free-standing sign is permitted, if a property has a second street- facing frontage, one additional freestanding sign shall be permitted on the side street.
Flat Wall Sign	•   Building Sign total. the total sign area on each elevation of a building for any single business shall not exceed 1 square foot for each lineal foot of building elevation. •   if the building setback is greater than 70 feet, an additional half (0.5) of a square foot of building sign shall be allowed for each lineal foot of the building frontage (i.e., 1.5 square feet of sign area for each lineal foot of building frontage). •   When erected on a multi-story building, an additional 0.2 square feet per foot of building frontage may be added for all stories two or above (i.e. a two story building would be permitted 1.2 square feet of sign area for each lineal foot of building frontage)
Marquee Signs	A marquee sign may not be larger than 160 square feet per each of two sides, to include signage face only, not any constructed awnings that are attached to the sign.
Awning Signs	signage shall not cover more than 50% of an awning, calculated by adding the area of the valance and the sloping portion, and it may be located on either the valance or the sloping portion of the awning.
Projecting Signs	a projecting sign may not be larger than 10 square feet on each two sides. every face of a projecting sign shall be considered as a separate sign for purposes of computing the allowable area.
Canopy Signs	a canopy sign shall not exceed the lesser of 2 square feet per lineal foot of building frontage or 24 square feet
Window Signs	a window sign may not exceed more than 40% of the window on which it is affixed but shall not occupy more than two windows.
Roof Signs	the total area of a roof sign shall be limited to a width not to exceed one-third of the width of the building's front façade, which must be parallel to the sign, and a sign height no greater than 6 feet.

(Ord. 081-2023. Passed 10-3-23.)