(a) The following information shall be supplied in addition to the requirements in Section 1175.07. All drawings shall be twenty-four (24) by thirty-six (36) inches in size and at scales suitable for review as determined by the Village Engineer.
(1) Statement of proposed use of lots, giving type and number of dwelling units; and type of business or industry if use is not residential.
(2) Description of proposed covenants and restrictions.
(3) Description of proposed zoning changes.
(4) Typical street sections and tentative profiles of streets and other related improvements. Calculations as required to justify horizontal and vertical curves, pipes sizes, etc. The Village Engineer shall have approved the layout and design of the lots, streets and other improvements prior to the preliminary plat approval.
(5) A preliminary drainage plan which shall identify adequate drainage outlets and shall contain adequate measures for control of erosion and siltation and for surface water management. The Village Engineer shall have approved the preliminary drainage plan prior to the preliminary plat approval.
(6) Letters from utility companies, as required, indicating approval of easement locations and widths prior to the preliminary plat approval.
(7) A vicinity map at a scale of not more than six thousand (6000) feet to an inch shall be shown on, or shall accompany, the preliminary plat. This map shall show all existing subdivisions, road and tract lines, together with the names of the owners of land immediately adjoining the proposed subdivision and between it and the nearest existing thoroughfares. It shall also show the most advantageous connections between the roads in the proposed subdivisions and between it and the nearest existing thoroughfares.
(Ord. 2021-17. Passed 9-8-21.)