(A) Final plats shall be prepared and stamped by a registered surveyor or engineer. The plats shall be drawn in black India ink on reproducible Mylar at a minimum scale of one inch = 100 feet, and magnetic data files shall be provided to the village in a format compatible with village mapping systems. The size of the reproducible Mylar shall be 24 inches by 36 inches.
(B) In addition to preliminary plat requirement items, final plats shall include the following:
(1) A location map showing the relationship of the proposed subdivision to the surrounding area;
(2) The name of the subdivision, north arrow, scale, and date;
(3) The names of all adjoining property owners as shown on the preliminary plat;
(4) The boundary lines of the area being subdivided with accurate distance and bearings, including section, corporation, and county lines;
(5) Curve data for street including the radii, arcs, chords, chord bearings, tangent, and central angle;
(6) Accurate dimensions for all lots, reserve parcels, rights-of-way, and easements;
(7) Accurate location of all required monuments;
(8) A summary of the area of land used for each of the following:
(a) Lots;
(b) Rights-of-way;
(c) Parks; and
(d) Other open space.
(9) Location of setback lines from all rights-of-way, public or private, and the building envelope shown on all irregular lots;
(10) An acknowledgment by and bearing the signature of the owner that the plat was prepared with the owner’s consent and approval and dedicating the streets and the appropriate areas to the village;
(11) A statement signed by the owner setting forth the rights associated with the easements and reserve parcels shown on the plat;
(12) Certification by a registered surveyor that the information contained on the plat is true and correct and conforms to the requirements of these subdivision regulations;
(13) An approval block for the endorsement of the plat by the Village Manager and Clerk of Council upon the approval by Village Council. The approval block and associated subdivision plat wording is shown in Appendix E attached to Ord. 96-106; and
(14) Limitations on utility services to any parcels as set forth in § 152.071.
(C) The final plat shall not be approved until the following items have been submitted to the Village Manager:
(1) Improvement plans prepared by a registered engineer for all required improvements at a scale of one inch = 50 feet on 24 inch by 36 inch or at such other scale acceptable to the Village Engineer;
(2) A landscaping plan;
(3) A traffic-control and signage plan;
(4) A lighting plan;
(5) An erosion and sedimentation control plan as described in § 152.074;
(6) A grading plan;
(7) A letter from the Ohio EPA and the Village Engineer approving the improvement plans for the sanitary sewer;
(8) A letter from the Ohio EPA and the Village Engineer approving the improvement plans for the water distribution system;
(10) All approvals from regulatory agencies;
(11) Payment of all required fees; and
(12) Any other items required as a condition of approval by the Village Council, the Planning Commission, and the Subdivision Code of the village.
(Ord. 96-106, passed 3-20-1996)