Separate plans and specifications including all necessary details, profiles and cross-sections for each improvement, specified in Section 1228.01, must be submitted to the Engineer and his approval obtained thereon after conditional approval of the preliminary plat and prior to the installation or construction of each such improvement and prior to any action of the Planning Commission or Council to approve the final plat for record. Such plans and specifications must have been prepared by a registered professional engineer on tracing cloth or an equivalent, upon sheets measuring approximately twenty-four inches in width and thirty-six inches in length to scale with the signature and seal of the registered engineer affixed thereto. If the plans and specifications submitted to the Engineer show compliance with the minimum standards and with the other requirements of these Regulations, and with the approved preliminary plat for the subdivision, the Engineer shall approve such plans and specifications.
(Ord. 2005-161. Passed 11-21-05.)
(Ord. 2005-161. Passed 11-21-05.)