(A) All water lines and service lines shall be of a minimum depth of four and one-half feet below the finished grade of each street or lot within said subdivision.
(B) Sizes of pipe shall be as determined by the Water and Sewer Superintendent/Village Administrator.
(C) All pipe shall be claw ductile pipe, or the equivalent thereof, with two wedges in each joint.
(D) All service lines from the main line to the curb box shall be copper.
(E) Corporation stops and curb stops shall be Mueller, or the equivalent thereof.
(F) Fire hydrants and valves shall be Eddy hydrants and valves, or the equivalent thereof.
(G) There shall be a valve on each hydrant.
(H) All hydrants shall be break-away pumper hydrants or the equivalent thereof.
(I) All valve boxes shall be of cast iron.
(J) All taps shall be from one-half inch to two-thirds inch from the bottom of each line. No toptapping will be permitted.
(K) There shall be no tapping on the top of each line.
(L) All main line valves shall be at the end of the street.
(M) All meters in residence and businesses shall be Rockwell magnetic meters with outside meter readers, or the equivalent thereof.
(N) The amount of fire hydrants shall be determined by the Commission, with the advice and consent of the Water and Sewer Superintendent/Village Administrator.
(O) Sewer line pipe shall be vitrified pipe bell or slip joint, or the equivalent thereof.
(P) All sewer lines shall be air tested for leaks according to specifications.
(Q) All manholes shall be cement-casted.
(R) No waste unsuitable for the existing sewer plant shall be discharged into sewer lines.
(S) All industries that have, or expect to have, grease waste shall have a grease trap.
(Ord. O-28-2021, passed 11-16-2021)