The preliminary plat shall contain the following information:
(a) Proposed name of the subdivision, which shall not duplicate or closely approximate the name of any other subdivision in the City.
(b) Location by section, range, and township or other surveys.
(c) Names, addresses and phone numbers of the owner, subdivider and professional engineer and registered surveyor who prepared the plat, and appropriate registration numbers and seals.
(d) Date of survey.
(e) Scale of the plat and north point.
(f) Boundaries of the subdivision and its acreage.
(g) Names of adjacent subdivision, owners of adjoining parcels of unsubdivided land, and the location of their boundary lines.
(h) Locations, widths and names of existing streets, railroad rights of way, easements, parks, permanent buildings and corporation and township lines; location of wooded areas and other significant topographic and natural features within and adjacent to the plat for a minimum distance of 200 feet.
(i) Zoning classification of the tract and adjoining properties and a description of proposed zoning changes, if any.
(j) Existing contours at an interval of not greater than two feet if the slope of the ground is ten percent (10%) or less; and not greater than five feet where the slope is more than ten percent (10%).
(k) Existing sewers, water lines, culverts and other underground structures and power transmission poles and lines, within or adjacent to the tract.
(l) Location, names and widths of proposed streets and easements.
(m) Building setback lines with dimensions.
(n) Location and dimensions of all proposed utility and sewer lines, showing their connections with the existing system.
(o) Layout, numbers and approximate dimensions of each lot. When a lot is located on a curved street or when side lot lines are not at ninety degree angles, the width at the property line shall be shown.
(p) Parcels of land in acres to be reserved for public use or to be reserved by covenant for residents of the subdivisions.
(Ord. 85-11. Passed 4-1-85.)