After the adoption of the approved Preliminary Plan by Council, final approval of uses and layout must be obtained from the Planning Commission. The following procedure shall regulate this process.
(a) Contents of Final Development Plans. The applicant shall submit to the Development Director a Final Plan application including 5 copies of the Final Plan. Final Plans shall be drawn at a minimum scale of one (1) inch equals one hundred (100) feet. Copies of the Final Plan shall include the following as a minimum:
(1) The phasing schedule, if applicable.
(2) Identification of the land area to be developed and the land area to be devoted to open space with accurate acreage for each use.
(3) Final grading plans, indicating cubic footage of cuts and fills.
(4) The interior roadway system, indicating existing and proposed rights-of-way and easements and cross sections of new or improved streets.
(5) The location and widths of sidewalks and pedestrian ways.
(6) Site plans, floor plans, elevations, and cross sections for all buildings. Additional exterior detail drawings, materials specifications and paint colors will be required if deemed essential to the realization of the intent or scope of the "PUD" plan.
(7) Descriptions as to the type of buildings, square footages and use.
(8) The proposed open space system and areas to be in common ownership, if any.
(9) A detailed landscaping plan for all areas, indicating all existing and proposed vegetation by species, size and caliper; dimensions and materials, irrigation, and special lighting fixtures where applicable.
(10) Roadway, parking, and pedestrian lighting plans with lighting fixture types, heights and designs.
(11) The location, size, height, material, lighting method (if any), message, and design layout of all signage.
(12) Any modification of the general plan data presented and approved for the "PUD" applications may be required by the Planning Commission.
(b) Action by the Planning Commission. The Planning Commission shall act on the Final Plan as specified in Section 1165.13(a). In approving the Final Plan, the Planning Commission shall and all of the following to exist:
(1) The proposed Final Plan conforms to and is consistent with the approved Preliminary Plan;
(2) The proposed Final Plan complies with any and all conditions, that may have been imposed in the approval of the Preliminary Plan; and
(3) The proposed Final Plan is in accordance with the requirements of Section 1165.09, General Development Criteria for a Planned Unit Development Overlay.
(4) The relationship and compatibility of the proposed plan to the adjacent properties and neighborhood. Violations of such conditions or Safeguards, when made a part of the terms under which the Final Plan is approved. shall be deemed a violation of this Zoning Code and punishable as stated in Chapter 1125, Enforcement. (Ord. 26-2010. Passed 8-5-10.)