(a) Alleys may be required by the Planning Commission along rear lot lines in subdivisions in manufacturing districts where other definite and assured provisions are not made for service access to off- street loading spaces and off-street parking spaces consistent with and adequate for the uses proposed and as required by this Planning and Zoning Code.
(b) The width of an alley shall not be greater than twenty-four feet or less than sixteen feet.
(c) Alley intersections and sharp changes in direction shall be avoided, but, where necessary, corners shall be rounded sufficiently to permit safe vehicular movement.
(d) Dead-end alleys shall be avoided where possible, but, if necessary, they shall be provided with adequate turn-around facilities at the closed end for the convenient turning of the largest vehicle anticipated. In no case shall a dead-end alley exceed 250 feet.
(Ord. 55-06. Passed 12-11-06.)