A. Where the scope of this chapter applies, landscape plans shall be submitted and approved by the same procedure set forth in this code for a site plan for commercial and industrial developments, and for planned unit developments.
B. The landscape plan shall show exact locations and quantities of landscape features. Each proposed plant shall be identified as to botanical and common name, size and installed condition (balled and burlapped, container, etc.). Bare root plants shall not be allowed.
C. At the preliminary plat stage, a "preliminary landscape plan", indicating general locations and approximate quantities of landscape features shall be prepared. A list of typical plants proposed shall be provided, including common and botanical names, installed condition, and approximate sizes.
D. All landscape plans shall include the following:
1. North point and scale.
2. Topographic information and proposed grades.
3. Proposed pavements and structures, including at grade screen walls and fences.
4. Existing and proposed utilities, above and below ground, including pole mounted light fixtures.
5. Location, type, size, quantity and installed condition of all proposed landscape materials.
6. Common and botanical names of all proposed plant material.
7. Location, size, and common/botanical name of existing vegetation to remain, in a manner to differentiate this vegetation from proposed vegetation.
8. Symbols representing proposed plant material shall be drawn to scale showing approximately two-thirds (2/3) to full mature size and labeled as to quantity and type.
9. Summary of plant units required and proposed.
10. Locations of required irrigation system.
11. Location and details of all site amenities including, but not limited to, trash receptacles, bicycle racks, benches, tables and chairs, and movable planters. (Ord. 15-1766, 2-10-2015)