Loading...
§ 50.044 GREASE, OIL AND SAND INTERCEPTORS.
   (A)   Grease, oil and sand interceptors shall be provided when required by the state's Plumbing Code and/or the village.
      (1)   All gas, oil and flammable liquids interceptors shall be of a type and capacity required by the state's Plumbing Code and shall be located as to be readily and easily accessible for cleaning and inspection.
      (2)   All grease interceptors to be located within the village's Sub Facility Planning Area, as defined by the state's Plumbing Code, for new construction or changes in uses of existing structures shall be a minimum of 1,000-gallons' capacity and located outside the building.
   (B)   Owners shall maintain all interceptors to ensure proper operation and shall maintain a service log for village inspection which shall include copies of service tickets.
(Am. Ord. 2020-03-02C, passed 3-2-2020)
§ 50.045 FACILITY MAINTENANCE.
   Where preliminary treatment or flow-equalizing facilities are provided, they shall be maintained continuously in satisfactory and effective operation by the owner at his or her expense.
(Am. Ord. 2020-03-02C, passed 3-2-2020)
§ 50.046 CONTROL MANHOLE.
   Each industry shall be required to install a control manhole and, when required by the village, the owner of any property serviced by a building sewer carrying industrial wastes shall install a suitable control manhole together with such necessary meters and other appurtenances in the building sewer to facilitate observation, sampling and measurement of the wastes. The manhole, when required, shall be accessibly and safely located, and shall be constructed in accordance with plans approved by the village. The manhole shall be installed by the owner at his or her expense and shall be maintained by him or her so as to be safe and accessible at all times.
(Am. Ord. 2020-03-02C, passed 3-2-2020)
ANALYSES, TESTING, INSPECTIONS
§ 50.060 LABORATORY ANALYSIS.
   The owner of any property serviced by a building sewer carrying industrial wastes shall provide laboratory measurements, tests and analysis of waters and wastes to illustrate compliance with this chapter and any special conditions for discharge established by the village or regulatory agencies having jurisdiction over the discharge. The number, type and frequency of laboratory analysis to be performed by the owner shall be as stipulated by the village, but no less than once per year, the industry must supply a complete analysis of the constituents of the wastewater discharge to assure codes are being met. The owner shall report the results of measurements and laboratory analysis to the village at such times and in such a manner as prescribed by the village. The owner shall bear the expense of all measurements, analysis and reporting required by the village. At such times as deemed necessary, the village reserves the right to take measurements and samples for analysis by an outside laboratory service. The owner shall pay for the costs of the outside laboratory service.
(Am. Ord. 2020-03-02C, passed 3-2-2020)
§ 50.061 TESTING REQUIREMENTS.
   (A)   All measurements, tests and analysis of the characteristics of waters and wastes to which reference is made in this chapter shall be determined in accordance with the latest edition of the Standard Methods for Examination of Water and Wastewater, and shall be determined at the control manhole provided, or upon suitable samples taken at the control manhole.
   (B)   In the event that no special manhole has been required, the control manhole shall be considered to be the nearest down-stream manhole in the public sewer to the point at which the building sewer is connected.
   (C)   Sampling shall be carried out by customarily accepted methods to reflect the effect of constituents upon the sewage works and to determine the existence of hazards to life, limb and property. The particular analysis involved will determine whether a 24-hour composite of all outfalls of a premise is appropriate or whether a grab sample or samples should be taken.
   (D)   Normally, but not always, BOD and suspended solids analysis are obtained from 24-hour composites of all outfalls, whereas pHs are determined from periodic grab samples.
(Am. Ord. 2020-03-02C, passed 3-2-2020)
§ 50.062 SPECIAL ARRANGEMENTS.
   No statement contained in this chapter shall be construed as preventing any special agreement or arrangement between the village and any industrial concern whereby an industrial waste or unusual strength or character may be accepted by the village for treatment, subject to payment therefor, in accordance with the charges established by the village, and by the industrial concern; provided, the payments are in accordance with federal and state guidelines for user charge system.
(Am. Ord. 2020-03-02C, passed 3-2-2020)
Loading...