The Electrical Inspector shall complete inspection of work by the close of the working day of the department following the day on which the department has been notified that the work is ready for inspection. When, upon inspection of the work, the Electrical Inspector finds the electrical installation to be fully in compliance with provisions of this article, and not to constitute a hazard to life and property, he or she shall attach to the installation a tag approving the installation, and shall authorize connection of the installation to the electrical service and the turning on of the power. If the Electrical Inspector finds the electrical installation not to be fully in compliance with provisions of this article, or that it constitutes a hazard to life or property, he or she shall so notify the person, firm, or corporation who made the installation and, if such person, firm, or corporation shall so request, shall furnish to such person a statement in writing of the reasons for such finding. No power shall be turned on until an approval tag has been attached and authorization for a connection has been given by the Electrical Inspector, provided, if the Electrical Inspector shall fail to complete an inspection within the time herein limited, work may proceed or, as the case may be, a connection may be made or power may be turned on at the risk of the person doing the work and his or her employer, if any.
(Ord. 1116, passed 2-25-1957; Ord. 2200, passed - -1976)