You are viewing an archived code
In order to preserve land and building space for light industrial activities, non-accessory Retail and Office Uses that exceed the square footage stated in the table below shall not be permitted in PDR-1-B and PDR-2 Districts. The use area shall be measured as the Occupied Floor Area of all retail or offices activities on a lot that have a (1) or (2) in the respective zoning district's use control column in Table 210.3 (Zoning Control Table for PDR Districts). Additionally, a cumulative use size maximum applies in PDR-1-B and PDR-2 Districts, such that the combined floor area of any and all uses permitted by Table 210.3 with a (1) or (2) in the respective zoning district's use control column may not exceed the limits stated in the table below for any given lot.
These use size maximum limits shall not apply to accessory uses, as defined in Section 204.3 of this Code.
District | Cumulative Use Size Limit, All Uses in Chart 210.3 followed by a (1) | Cumulative Use Size Limit, All Uses in Chart 210.3 followed by a (2) | Total Size Maximum, All Uses in Chart 210.3 followed by a (1) or (2) Combined |
PDR-1-B | 2,500 sq. ft. | 5,000 sq. ft. | 7,500 sq. ft. |
PDR-2 | 2,500 sq. ft. | 5,000 sq. ft. | 5,000 sq. ft. |
AMENDMENT HISTORY