Skip to code content (skip section selection)
Compare to:

You are viewing an archived code

SEC. 263.25.  SPECIAL EXCEPTIONS: HUNTERS POINT SHIPYARD PHASE 2 SPECIAL USE DISTRICT AND THE HP HEIGHT AND BULK DISTRICT.
   (a)   Boundaries of the HP Height and Bulk District. The boundaries of the HP Height and Bulk District are set forth in Sectional Map HT09 of the Zoning Map of the City and County of San Francisco. The boundaries of the HP Height and Bulk District generally correlate with the contiguous boundaries of Phase 2 of the Hunters Point Shipyard development as shown on the Land Use Map attached to the Hunters Point Shipyard Redevelopment Plan, as amended on August 3, 2010
   (b)   Purpose. The purpose of both the Hunters Point Shipyard Phase 2 Special Use District and the HP Height and Bulk District is to enable development of the Candlestick Point-Hunters Point Shipyard Phase 2 Development Project, a high density, transit-oriented, mixed-use development (housing, retail, office, sports fields and stadium, artist space and other community uses) with significant public open space and public realm improvements, as provided in the Hunters Point Shipyard Redevelopment Plan, as amended, dated August 3, 2010, the Hunters Point Shipyard Design for Development document dated June 3, 2010, and the Hunters Point Shipyard Area Plan. Integral to the intended mixed-use development is the provision of buildings at a variety of heights, ranging from approximately 40 feet to 370 feet tall.
   (c)   Controls.
      (1)   In the Hunters Point Shipyard Phase 2 Special Use District and the HP Height and Bulk District, height and bulk and definitions applicable thereto will be governed by the Hunters Point Shipyard Redevelopment Plan, as amended on August 3, 2010, and the Hunters Point Shipyard Phase 2 Design for Development document dated June 3, 2010.
      (2)   Amendments to land use and development controls under the Hunters Point Redevelopment Plan or to the Hunters Point Shipyard Phase 2 Design for Development document shall be as provided in those respective documents.
(Added by Ord. 208-10, File No. 208-10, App. 8/3/2010)