The developer shall furnish, with the application for approval of the final plat of a subdivision, the following plans, data and plats:
(a) Final Plat. Shall be drawn and signed in India ink on tracing cloth, or other black-line reproducible positive on a medium satisfactory to the Building Division, at a scale not less than one hundred (100) feet to one (1) inch. Sheets shall be twenty-four (24) inches by thirty-six (36) inches (.61m by .91m) in size; if necessary, the plat shall consist of several sheets, including an index and references to adjoining sheets. The plat shall include only the portion of the subdivision proposed for immediate recording and development, and show the following:
(1) Control points. Points to which all dimensions, angles and bearings are to be referred; nearest street or section line or other established point.
(2) Lines and boundaries. Center lines and right-of-way lines of streets, easements and other rights of way; natural and artificial watercourses, streams, shorelines; corporation lines; and property lines of all lots and parcels with distances, radii, arcs, chords and tangents (nearest one- hundredth of a foot) bearings or deflection angles (nearest second of all curves).
(3) Street. Name and width of each street within proposed subdivision and those adjoining; building setback line; street tree plan in accordance with Section 1111.11
.
(4) Lot and block identification. Number or letter, in progressive order, for each lot and block conforming with Cuyahoga County Recorder's procedures.
(5) Dedication and acceptance. Boundaries of and purpose for which any parcels, other than residential lots, are to be dedicated or reserved for public use; purpose and dimensions of easements.
(6) Monuments. Location and description of those found, set or to be set.
(7) Adjoining land. Names and recorded owners of adjoining unplatted land; reference to adjoining platted land by name, volume and page of Recorder's maps.
(8) Certification. By owner of acceptance of plat and statement offering dedication of streets, rights of way and any sites for public use or reserved by deed covenants for common use of all property owners.
(9) Certification and seal. By a registered surveyor as to preparation and details of survey and plat.
(10) Protective covenants. Reference to or included on plat.
(11) Title. Of subdivision, municipality, county, state, original township section, tract or lot; scale shown numerically and graphically, north arrow and date.
(12) Certification. For approval by the Commission and City officials.
(b) Improvements Plans. Drawings and specifications showing cross-sections, profiles, elevations and construction details for all required improvements, in accordance with the requirements of Chapter 1111.
(c) Certification by City Engineer. Stating that the developer has:
(1) Installed all required improvements in accordance with the provisions of these Regulations and any conditions set forth by the Commission in their approval of the preliminary plan; or
(2) Posted financial guarantees in sufficient amount to assure completion of all required improvements.
(d) Protective Covenants. Restrictions, by-laws, declarations and other covenants in final form, to be recorded separately.
(e) Other Statements and Data.
(1) Statement that there are no unpaid taxes or special assessments against the tract and that the developer owns the property.
(2) Other data, certificates or affidavits, as may be required by the Planning Commission or Building Commissioner in the enforcement of these Regulations.
(Ord. 58-73. Passed 7-23-73.)