A. For covered projects, prior to issuance of a building or demolition permit, the applicant must complete and submit to the director a waste reduction and recycling plan on a form provided by the village. The waste reduction and recycling plan must include the following information, and such other information as the department may require:
1. Identification of materials to be diverted;
2. A description of whether and to what extent materials will be separated on site or commingled;
3. The estimated weight of C&D debris, divided between inert debris and other debris;
4. The estimated weight of the inert and other C&D debris that can be diverted;
5. The estimated weight of the inert and other C&D debris that will be landfilled as solid waste;
6. The identification of the vendors or facilities that will collect or receive the construction or demolition debris, and such information as the code official may require demonstrating that the vendor or facility will recycle all C&D debris received from the covered project;
7. The estimated date on which demolition and/or construction is to commence; and
8. Agreement by the general contractor for the covered project to comply with all of the terms of the waste reduction and recycling plan and this chapter.
Where all of the facts cannot be ascertained, the applicant shall provide the best estimate based on all information reasonably available about the covered project.
B. No permit shall be issued for a covered project unless and until the director has reviewed and approved the project's waste reduction and recycling plan. A waste reduction and recycling plan shall be approved only if the code official determines that the plan demonstrates compliance with the requirements of this chapter.
C. If the director determines that the waste reduction and recycling plan is incomplete or fails to satisfy the requirements of this chapter, the director may:
1. Return the waste reduction and recycling plan to the applicant marked "Disapproved", including a statement of reasons for disapproval; or
2. Return the waste reduction and recycling plan to the applicant marked "Further Explanation Required", including a statement of areas requiring additional information.
D. An approved waste reduction and recycling plan is not permitted to be amended without the prior written approval of the director.
E. If at any time it becomes apparent to the director that the contents of an approved plan are no longer accurate, the director may require that the applicant submit an addendum or revision to the plan with such information as may be required by the director. (Ord. 14-04-09, 4-16-2014)