11-6-3: AREA AND BULK STANDARDS:
   A.   Table 11-6-3.1, Residential Area Standards: Every residential use in a residential district shall be subject to the lot width, lot area, and density requirements set forth in table 11-6-3.1, except as otherwise provided in this subsection, and in sections 11-5-7A and 11-14-1 of this title.
TABLE 11-6-3.1, RESIDENTIAL AREA STANDARDS
Minimum Lot Width
(Feet)
Minimum
Lot Area
(Sq. Ft)
Intensity
(Minimum Square Feet Lot Area Based On Number Of
Dwelling Units)
Maximum
Permitted
Gross
Density
(Dwelling
Units
Per Acre)
One
Dwelling
Unit
Two
Dwelling
Units
3 & 4
Family
Units
Other
Uses
Single
Dwelling
Unit
Two
Dwelling Units
3 & 4
Family
Residences
Nonresidential
Other
Minimum Lot Width
(Feet)
Minimum
Lot Area
(Sq. Ft)
Intensity
(Minimum Square Feet Lot Area Based On Number Of
Dwelling Units)
Maximum
Permitted
Gross
Density
(Dwelling
Units
Per Acre)
One
Dwelling
Unit
Two
Dwelling
Units
3 & 4
Family
Units
Other
Uses
Single
Dwelling
Unit
Two
Dwelling Units
3 & 4
Family
Residences
Nonresidential
Other
   R-1
50' @ BL, must abut street 45'
 
 
100' @ BL, must abut street 45'
7,200
7,200
 
 
 
 
6
   R-2
50' @ BL, must abut street 45'
50' @ BL, must abut street 45'
 
100' @ BL, must abut street 45'
6,000
6,000
7,200
 
 
 
7
   R-2M
50' @ BL, must abut street 45'
50' @ BL, must abut street 45'
60' @ BL, must abut street 45'
100'
5,000
5,000
6,000
7,200
7,200
14,400
16
   R-3
50' @ BL, must abut street 45'
50' @ BL, must abut street 45'
60' @ BL, must abut street 45'
100'
5,000
5,000
5,000
7,200
7,200
14,400
--
   RMHP
30'
 
 
--
3,500 per space
--
--
--
--
--
8/acre minimum dev. area, 5 acres
   RMHS
50'
 
 
 
6,000
6,000
5,000
--
--
--
6/acre minimum dev. area 5 acres
 
   B.   Table 11-6-3.2, Residential Bulk Standards: Every residential use in a residential district shall be subject to the yard, lot coverage, and height requirements set forth in table 11-6-3.2, except as otherwise provided in this subsection and in sections 11-5-7A and 11-14-1 of this title. (Ord. 5916, 8-9-1999)
TABLE 11-6-3.2, RESIDENTIAL BULK STANDARDS
District
Minimum Yards
Maximum Lot Coverage
Maximum Height 1
Front1
Side1
Rear1,3
Corner2
Interior
Corner2
Interior
Corner1
Interior1
District
Minimum Yards
Maximum Lot Coverage
Maximum Height 1
Front1
Side1
Rear1,3
Corner2
Interior
Corner2
Interior
Corner1
Interior1
R-1
20'
25'
20'
6'
20' or 25% of depth whichever is less
40%
40%
21/2 stories or 35'
R-2
20'
25'
20'
6'
20' on corner or interior lot
40%
40%
21/2 stories or 35'
R-2M
20'
25'
20'
6'
10' on corner or interior lot
40%
40%
21/2 stories or 35'
R-3
20'
25'
20'
6'
10' on corner or interior lot
40%
40%
21/2 stories or 35'
RMHP
35' from centerline of access drive
35' from centerline of access drive
10'
10'
10'
40%
40%
21/2 stories or 35'
RMHS
25'
25'
20'
6'
15'
40%
40%
21/2 stories or 35'
 
Notes:
    1.    For accessory buildings and structures, reference subsection 11-5-1D, "Bulk Standards", of this title.
    2.    Houses on a corner shall be considered as having 2 front yards, and shall meet the front yard requirements on both corners.
    3.    Rear yards for Nonnamaker Addition, blocks 3 and 4, shall have a depth of 15 feet or 25 percent of the depth of the lot, whichever is smaller.
(Ord. 6170, 5-13-2013)
All uses shall contain adequate space on private property to provide for parking, loading and maneuvering vehicles.
All lighting shall be arranged so there will be no annoying glare directed or reflected toward adjacent property.
   C.   Zero Lot Line Developments: No interior side yard is required on one side for zero lot line and semidetached single-family dwellings in the districts where permitted. The opposite side yard for zero lot line dwellings shall not be less than twelve feet (12'). (See section 11-5-7 of this title.)
   D.   Yard, Lot And Height: All principal uses, other than dwellings, in any residential district, shall be subject to the following requirements except as otherwise provided in sections 11-5-4 and 11-14-1 of this title.
      1.   Minimum yards: Twenty five feet (25') on all sides.
      2.   Maximum lot coverage: As set forth in table 11-6-3.2 of this section for the respective districts.
      3.   Maximum height: As set forth in table 11-6-3.2 of this section for the respective districts.
   E.   Multi-Family Parking Areas: Multi-family parking areas shall be screened from surrounding uses by a six foot (6') sightproof fence. Lighting for multi-family parking lots shall be designed such that it will not illuminate surrounding uses (see section 11-7-4 of this title). (Ord. 5916, 8-9-1999)