(A) A facility meeting the criteria must possess and maintain a properly sized grease trap interceptor.
(B) All existing facilities that generate oil and grease will be allowed to install under the sink indoor traps and/or automatic traps sized by an engineer or the grease trap manufacturer, but an emphasis will be placed on maintenance records showing that these traps are cleaned daily and documented by employees of the establishment.
(C) All new facilities that generate oil and grease will be required to install, at a minimum, a 750-gallon grease trap interceptor sized by an engineer or the grease trap manufacturer.
(D) Town staff will not be responsible for actual sizing of any traps. This will be performed by the business having the trap installed.
(E) After the proper sizing is approved by town staff, the pre-cast unit can be purchased and installed at the owner’s expense.
(F) After installment, the plumbing should be inspected by the Plumbing Inspector.
(G) Equations from the EPA design manual On-site Treatment and Disposal Systems are used to check the adequacy of the proposed grease trap interceptor based on the size, location, and running time of the facility.
(Prior Code, § 51.27) Penalty, see § 10.99