(A) Valve boxes shall be good quality cast iron and made in sections. They shall be provided with cast iron lids or covers marked "Water". The total length of the valve box shall be sufficient to permit the top of the box to be set flush with the established grade.
(B) Valve basins shall be of precast concrete per ASTM specification C-478 with bituminous mastic joints, 48 inch inside diameter with type 1 frames and closed lid, marked "Water". The design shall be submitted to the Village Engineer for approval. Valve basins are required under all pavement including streets, sidewalks and parking lots.
(C) When submitting plans for approval for water and sewer, the Public Works Department requires two plot plans, three engineering plans, and a plan of on site water and sewer.
(D) "As-built" drawings are required of all installations upon completion, indicating exact measurements and measurements of house service stubs from the nearest hydrant, B-box location from the main line; all service lines will run in a straight line to the property, and a total list of the following shall be included:
(1) Number of hydrants,
(2) Size and total length of mains,
(3) Number and size of valves,
(4) Number of B-boxes.
(E) One "as-built" sepia and four prints of good condition showing exact measurements for locations of curb boxes, valves, fire hydrants, and the like, will be required upon completion of installation.
(Ord. 79-08, passed 11-26-79)