1177.06   YARD AND HEIGHT REGULATIONS.
   (a)   In an Industrial Park District, the minimum front, side and rear yards shall be provided on every lot occupied by a main, conditional or accessory building or use in accordance with the schedule set forth below.
   (b)   The height of a main, conditional or accessory building or use shall not exceed the number of feet or stories set forth in the schedule set forth below.
   (c)   The above-required front and side yards may be used for off-street parking or loading facilities subject to the required setbacks for such off-street parking or loading facilities and shall be landscaped appropriately and well maintained.
SCHEDULE OF YARD AND HEIGHT REGULATIONS
Yard and height regulations in the Industrial Park District shall be as set forth in the following schedule:
 
MINIMUM SETBACK FOR BUILDING
MINIMUM SETBACK FOR BUILDING ADJACENT TO RESIDENTIAL DISTRICT
MINIMUM SETBACK FOR BUILDING NOT ADJACENT TO RESIDENTIAL DISTRICT
MINIMUM SETBACK FOR OFF-STREET PARKING AND LOADING LOT ADJACENT TO RESIDENTIAL DISTRICT
MAXIMUM HEIGHT (ft.)
ZONING DISTRICT
USES
FRONT (ft.)
SIDE (ft.)
REAR (ft.)
SIDE (ft.)
REAR (ft.)
FRONT (ft.)
SIDE (ft.)
REAR (ft.)   
LOT    ADJACENT TO    RESIDENTIAL DISTRICT
LOT NOT ADJACENT TO RESIDENTIAL DISTRICT
Industrial Park
All permitted main, conditional, and accessory uses.   
50
60
75
30
30
50
10
10
40 except that service towers, chimneys, flagpoles, and similar features may exceed this height limit, provided that they do not occupy more than 10% of the horizontal roof area.
50 except that service towers, chimneys, flagpoles, and similar features may exceed this height limit, provided that they do not occupy more than 10% of the horizontal roof area.
 
(a)   Setback is measured from right-of-way line for front yards.
(b)   Corner lots will be treated as though they have two front yards.
(Ord. 73-97. Passed 4-7-97.)