(a) The refuse bin shall be tested by applying forces as described in paragraphs (a)(1) and (2) hereof, as follows:
(1) A horizontal force of seventy pounds (311N) shall be supplied to a point and in a direction most likely to cause tipping.
(2) A vertically downward force of 191 pounds (850N) shall be applied to a point most likely to cause tipping. (See Figure 1 below.)
(b) These forces shall be applied separately and the bin shall not tip over under the application of either action referred to in paragraphs (a)(1) and (2) hereof.
(Ord. 37-80. Passed 4-7-80.)