The final plat or recorded plat of the subdivision shall be submitted in the form of an original drawing in black India Ink or tracing cloth, together with six blueprints of same. The final plat shall be drawn to a scale of fifty feet or less to the inch and shall clearly show the features and information:
(a) All plat boundary lines with length to hundredths of a foot and bearings to thirty seconds. These boundaries shall be determined by an accurate survey in the field which shall balance and close. The error of closure shall not exceed 1 to 10,000. The exact location and the width along the property line of all existing or recorded streets intersecting or paralleling the boundaries at the tract.
(b) True bearings and distances to nearest established streets bounds, section lines or other official monuments, which monuments shall be located and accurately described on the plat. Any section line or corporation lines shall be accurately monument marked and shown on the plat, and their names shall be printed on them.
(c) The exact layout including, street lines, their new bearing angles or intersections and widths including widths along the line of any obliquely intersecting streets; the length of all arc, radius, points of curvature and tangent bearings and all easements or right of way when provided for or owned by the public utilities. The limitation of easement rights shall be definitely stated on the plat. All lot lines with dimensions in feet and hundredths, and with bearings and angles to minutes, if other than right angles to the street or alley lines.
(d) Lot numbers in numerical order. In tracts containing more than one block, the blocks shall be lettered in alphabetical order. In case there is a resubdivision of lots in any block, such subdivision lots shall be designated by their original number, prefixed with the term most accurately describing such division, or they shall be numbered numerically beginning with the number following the highest lot number in the block.
(e) The accurate outline of all property which is offered for public use, and all property that may be reserved by covenant in the deed for the common use of the property owners in the subdivision with the purpose indicated thereon.
(f) Setback building lines as fixed by the Zoning Code and any other setback lines or street lines established by the public authority and those indicated in the deed restriction.
(g) Private restriction, if any, shall have boundaries for each type of restrictions.
(h) Name of the subdivision and name and number of the largest subdivision of tract which tract now subdivided forms a part.
(i) Names and location and ownership of adjoining unsubdivided property.
(j) Names and addresses of the owner of record, the subdivider and of the engineer or surveyor.
(k) North point, scale and date.
(l) Statement that the lots transferred shall have a minimum width and are substantially the same as those shown on the plat, and that only one principal building shall be permitted on any such lot.
(m) Certification by a registered professional engineer or surveyor to the effect that the plat represents a survey made by him and that all monuments indicated thereon actually exist and their location, size, and material are correctly shown; and that all requirements of these Subdivision Regulations have been fully complied with.
(n) Approval of the final plat shall be null and void if not recorded within ten days after date of approval.
(Ord. 554. Passed 1-24-55.)