A. General Provisions For Business Park Signs: In the Business Park (B-P) Zone, on premises signs are permitted as follows:
1. Primary Wall Signs:
a. Number: Each building or unit is permitted one primary wall sign.
b. Size: The primary wall sign shall not exceed ten percent (10%) of the facade on which the sign is mounted, or thirty six (36) square feet, whichever is less.
c. Height: Each primary wall sign for single story buildings shall maintain a minimum of eight feet (8') of clearance between the top of the nearest sidewalk or curb and the bottom of the sign; each primary wall sign for multiple story buildings shall be mounted no lower than the bottom of the top floor of the building.
2. Ancillary Wall Signs:
a. Number: Ancillary uses within a building are permitted one wall sign each.
b. Size: The area of the sign shall not exceed eighteen (18) square feet.
c. Location: The sign shall be mounted by the nearest entrance leading to the ancillary use.
d. Height: The sign shall be mounted at or below the top of the first floor of the building, at a height no less than eight feet (8') and no more than fifteen feet (15'), as measured to the top of the sign.
3. Ground/Monument Signs:
a. Number: In addition to directional signs,
(1) A single building or use: One monument sign shall be allowed for each frontage in excess of one hundred feet (100') a building or use has on a public street.
(2) Multiple buildings or uses: One shared monument shall be allowed for each frontage in excess of two hundred feet (200') a site has on a public street.
b. Size: A monument sign for a single building or use shall not exceed fifty (50) square feet in size. A shared monument sign for multiple buildings or uses shall not exceed one hundred (100) square feet in size.
c. Height: A monument sign for a single building or use shall not exceed six feet (6') in height. A shared monument sign for multiple buildings or uses shall not exceed ten feet (10') in height.
4. Planned Center Signs:
a. The Planning Commission may allow common signs displaying advertising for all uses within a planned center on multiple parcels of property that may or may not have separate ownership. The Planning Commission will consider the following criteria as a basis for approval of the signs.
(1) Signs must be integrated into the development with a common theme or integrated architecturally with the buildings.
(2) Location, number, and size of all signs must receive approval by the Planning Commission and meet the provisions within the Sign Code.
(3) The applicant must submit elevations of all signs, and a site plan showing the location of the proposed signs.
(4) Additional standards for pedestal signs are located within section 17.48.140 of this chapter.
5. Pylon Signs:
a. Pylon signs shall comply with regulations found in section 17.48.140 of this chapter.
6. Window And Door Signs:
a. Window and door signs shall not exceed twenty five percent (25%) of the window or door on which the sign is located. (Ord. 19-14)