921.15 DISCHARGE PROCEDURES.
   (a)   SRF users should take all reasonable precautions to maintain their good health in this obviously health-sensitive operation (gloves, wiping cloths, etc.).
   (b)   Commercial haulers using the SRF shall gather a representative sample of the wastewater being delivered as described below in Section 921.16, “Sampling”.
   (c)   SRF users shall remove the cast iron lid from the correct discharge point, and shall hook their vehicle nozzle to this unloading port.
   (d)   Hauled wastewater shall then be unloaded in a professional manner. Spills outside the connect port shall be avoided.
   (e)   After discharging their load, the drivers shall use the hose provided to carefully flush any spills, tire dirt, and debris into the appropriate drain.
   (f)   Wash water shall not be indiscriminately sprayed on facility equipment.
   (g)   Before departing, drivers shall complete the manifest (including the sample number) and deposit the manifest form in the proper receptacle.
   (h)   Drivers should exit the facility following the exit procedures described herein.
(Ord. 1587. Passed 11-19-07.)