(a) Minimum Lot Area and Width. The area and width of a lot shall not be less than the dimensions set forth in Schedule 1151.05, except as otherwise regulated in this Code.
(b) Maximum Lot Coverage. The maximum lot coverage by building shall be as set forth in Schedule 1151.05.
(Ord. 2012-21. Passed 7-11-12.)
Minimum Lot Requirements | |
U-1 Dwelling House District | |
(1) Minimum lot area | 87,000 square feet |
(2) Minimum lot width at building setback line(a) | 175 feet |
(3) Maximum lot coverage by all buildings including accessory buildings | 12% |
(4) Minimum frontage on a dedicated public street | 50 feet |
(5) Minimum average mean lot width(b) | 175 feet |
(6) Maximum depth of the lot | (c) |
(a) On curved streets, the lot width shall be the arc length of the building setback line. (b) For purposes of this section, the "average mean width" of a parcel shall be the area of the parcel divided by the parcel's "mean depth." The "mean depth" of a parcel shall be the length of a straight line extending from the center point of the front line of the parcel to the center point of the parcel's rear line. (c) The depth of a parcel shall not exceed three times the parcel's average mean width unless the parcel's average mean width exceeds 300 feet or unless, due to topographic or other special conditions, the Planning Commission finds it necessary to alter this proportion of width to depth. | |
(Ord. 2013-05. Passed 6-12-13.)
(d) Flag Lots. In addition to the requirements in this Chapter, all flag lots shall comply with the following regulations:
(1) Provided the "staff" portion of the lot is less than 500 feet in length, a minimum of fifty (50) feet of frontage shall be required at the public street right-of-way. If the "staff portion of the lot is 500 feet or longer in length, a minimum of seventy-five (75) feet of frontage shall be required at the public street right-of-way.
(2) The area of the "staff" portion of the lot connecting the lot to the public street shall not be included in the area of the lot for the purposes of determining compliance with the required minimum lot area.
(3) For the purposes of determining compliance with required setbacks and lot width, the "staff" portion of the lot shall be disregarded. Compliance with setback and lot width requirements shall be determined on the "flag" portion of the lot only.
(Ord. 2012-21. Passed 7-11-12.)