The following property development standards shall apply to all land and permitted or conditionally permitted buildings located within their respective commercial zones. Table 3.4.03 of this section presents minimum setbacks for commercial zones and section 3.4.031, table 3.4.04 of this chapter presents dimensional standards.
Setbacks In Feet Minimum1,2
| NC | CC | CBD |
Front setback | 10 | 5 | 0 |
Side street setback | 10 | 5 | 0 |
Interior side setback | 5 | 0 | 0 |
Rear setback (no alley) | 5 | 10 | 0 |
Alley setback | n/a | 3 | 3 |
Notes:
1. The interior side and rear setbacks shall be as set forth in the abutting residential district with the most restrictive standards applying where the commercial zone abuts the residential zone.
2. If the side setback is less than 10 feet and the roof slopes toward the property line, the roof shall be designed to hold or shed snow to prevent snow accumulation on adjoining properties, unless otherwise allowed through a subdivision or PUD approval. See chapter 7, "Special Districts", of this title, for additional setback requirements.
(Ord. 821, 2-23-2006, eff. 3-16-2006)