The purpose of this chapter is to specify the process whereby new construction and remodeling of structures, landscaping, lighting, and public amenities are reviewed for compliance with development and design standards prescribed in title 3 “Planning And Zoning” and title 9 “Subdivision And Development Of The MCC” and outlined as follows:
1. Section 3.3.09 “Residential Zone Special Development Standards” which requires design review for accessory dwelling units, multifamily residential developments of two (2) or more units and single-family residential dwelling units greater than three thousand five hundred (3,500) square feet.
2. Section 3.4.031 “Maximum Setback” which allows for exception to the maximum setback through the design review process.
3. Section 3.4.07 “Commercial Zones Special Development Standards” which requires design review.
4. Table 3.5.03 which allows for exceptions to Table 3.5.03 DIMENSIONAL STANDARDS FOR INDUSTRIAL ZONE PROPERTY through the design review process.
5. Section 3.5.04 “Specific Standards For Industrial Development In Any Zone” which requires design review for industrial development that has a building footprint area of ten thousand (10,000) square feet or greater, or that proposes a maximum building height in excess of thirty five feet (35'), or that seeks to reduce the minimum setback distance.
6. Section 3.5.06 “Business Park Zone General Development Standards” which requires design review and allows for an exception to the maximum building setback through the design review process.
7. Section 3.6.03 “Public Zones General Development Standards” which requires design review except within the AP Zone.
11. Table 3.8.063 “Minimum Required Bicycle Parking Spaces” which requires standards for “other categories” of uses to be determined through design review.
12. Section 3.8.111 “Accessory Dwelling Units” which through the design review process allows for exception to the standard that the accessory dwelling unit have the same exterior finishing color and textures as the principal dwelling unit.
13. Section 3.8.16 “Other Requirements” which requires sidewalk, curb and gutter and/or pathways for projects in the commercial zones requiring design review.
14. Section 3.8.20 “Special Standards For Garages” which allows for exceptions to the standards through design review.
15. Section 3.13.032 “Application For Conditional Use Permit, (B) Camps,” which allows for design information to be deferred until after the approval of a conditional use permit if the applicant agrees to design review.
16. Section 9.6.03 “Driveways, Residential” requires design review for shared driveways. (Ord. 821, 2-23-2006, eff. 3-16-2006; amd. Ord. 998, 1-14-2021; Ord. 1009, 10-6-2022)