Loading...
DISTRICT REGULATIONS
§ 154.060 USE DISTRICTS NAMED.
   For the purpose of this chapter the Town of Liberty and its extraterritorial planning jurisdiction is divided into the following use districts:
   (A)   R40: Residential District;
   (B)   R12: Residential District;
   (C)   R6: Residential District;
   (D)   RMF: Residential Multi-Family District;
   (E)   B1: Central Business District;
   (F)   B2: General Business District;
   (G)   I: Industrial District; and
   (H)   IP: Industrial Park District.
(1981 Code, § 401) (Ord. passed 6-28-2004; Am. Ord. passed 8-8-2023)
§ 154.061 DISTRICT BOUNDARIES SHOWN ON ZONING MAP.
   (A)   The boundaries of the districts as shown on the map accompanying this chapter are entitled official zoning map, Liberty, North Carolina.
   (B)   The zoning map and all the notations, references, amendments and other information shown are made a part of this chapter the same as if the information set forth on the map was all fully described.
   (C)   The zoning map properly attested is posted at the Liberty Town Hall and is available for inspection by the public.
(1981 Code, § 402) (Ord. passed 6-28-2004)
§ 154.062 DUE CONSIDERATION GIVEN TO DISTRICT BOUNDARIES.
   Where uncertainty exists as to the boundaries of any of the districts as shown on the zoning map, the following rules shall apply:
   (A)   Where the district boundaries are indicated as approximately following streets, alleys or highways, the centerlines shall be construed to be the boundaries.
   (B)   Where district boundaries are indicated as approximately following lot lines, the lot lines shall be construed to be the boundaries.
   (C)   Where district boundaries are indicated as approximately being parallel to the center lines of streets, alleys, highways or the rights-of-way of same, the district boundaries shall be construed as being parallel and at the distance indicated on the zoning map.
   (D)   Where a district boundary line divides a lot or tract in single ownership, the district requirements for the least restricted portion of the lot or tract shall be deemed to apply to the whole provided the extensions shall not include a part of a lot or tract more than 50 feet beyond the district boundary line. The term LEAST RESTRICTED shall refer to use restrictions, not lot or tract size.
(1981 Code, § 403) (Ord. passed 6-28-2004)
§ 154.063 ONLY ONE OFFICIAL MAP.
   The final authority for the current zoning status of land, buildings or other structures in the affected territory shall be the official zoning map, which is located in the Town Hall. If any copies of the official map are different from the original, the official map shall be the final authority.
(1981 Code, § 404) (Ord. passed 6-28-2004)
Loading...