(A) Purpose. This district is established to provide for various types of park and recreation facilities in appropriate locations and with related activities and land uses.
(B) Permitted uses. In the PR Zoning District, the following uses are permitted:
(1) Recreational vehicle parks or recreation camps;
(2) Public park and recreation facilities;
(3) Parking facilities;
(4) Nature preserves, hiking trails, wildlife areas;
(5) Ball fields, swimming pools, horseback riding;
(6) Public boat launches and anchoring places; and
(7) Any other use deemed to be similar in accordance with § 152.085.
(C) Conditional uses. The following uses may be approved by the Planning Commission in accordance with § 152.086:
(1) Laundry facilities;
(2) Museums;
(3) Accessory uses and structures on an individual lot without a principal use or structure.
(D) Area regulations.
(1) Minimum front yards depth. 50 feet from the edge of the street right-of-way (see § 152.010(C) for additional yard requirements).
(2) Minimum side yard depth. 10 feet (see § 152.010(C) for additional yard and buffering requirements).
(3) Minimum rear yard depth. 10 feet (see § 152.010(C) for additional yard and buffering requirements).
(4) Height regulations. No building shall exceed 35 feet, except for accessory structures including, but not limited to radio towers, antennas, flag poles, and chimneys. A greater height limitation may be required if a property is within the Environmental Protection Overlay District.
(E) Sign regulations.
(1) Maximum sign area. Within the PR Zoning District, the maximum total sign area permitted for any one establishment shall be 45 square feet. Section 152.011(E) describes provisions for additional sign area.
(2) Maximum number and location of signs. Establishments are permitted to have up to two signs which may include wall signs, roof signs, and free standing signs.
(a) Window signs. An establishment may have window signs in addition to those signs permitted above, provided however, that the maximum area does not exceed 12 square feet total area.
(b) Sign illumination and materials. No free standing, roof or wall sign may be illuminated from a light source within the sign itself. All external light sources shall be designed so as to illuminate only the sign itself and shall not shine on any adjacent property. No sign may be made out of plastic materials.
(Ord. 1993-0-2, passed 3-13-93; Am. Ord. 1993-0-27, passed 10-21-93)