A. Development standards in the RO zone shall be as follows:
TABLE 13.50.051
Standard | |
Lot area | No minimum |
Lot width | No minimum |
Lot frontage | No minimum |
Maximum impervious surface coverage | 60 percent1 |
Maximum aboveground square feet | New construction - 3,500 per main building |
Existing structures - no limit |
Note:
1. The total percent impervious coverage may be increased through the use of approved permeable or porous surfaces no more than an additional 10 percent as allowed in subsection 13.14.080C of this title.
B. Development of lots on a private driveway (flag lot), as defined by section 13.04.040 of this code, is prohibited in the RO zone. No intervening development between the street and any main building on a lot in the RO zone shall be allowed.
TABLE 13.50.052
Maximum Building Height | |
Lot Area In Square Feet | Maximum Height In Feet |
Less than 15,000 | 32 |
15,000 and above | 35 |
(Ord. 2014-05, 4-17-2014)