The planning commission shall require such arrangement of structures and open spaces within the site development plan, as necessary, to assure that adjacent properties will not be adversely affected. (Ord. 2015-02, 2-5-2015)
A. Height And Intensity: Height and intensity of buildings and uses shall be arranged around the boundaries of the planned unit development to be compatible with existing adjacent developments or zones. However, unless conditions of the site so warrant, buildings located on the periphery of the development shall be limited to a maximum height of two (2) stories. All structures in the planned unit development shall comply with the graduated height restrictions of the underlying zone.
B. Area, Width, Yard And Coverage: Lot area, lot width, yard and coverage regulations shall be determined by approval of the site plan and shall meet the requirements of the underlying zone wherever possible. (Ord. 2014-06, 5-1-2014)
C. Density: Residential planned unit developments shall not exceed the density limitation of the zoning district where the planned unit development is proposed. The density for any residential planned unit development may not exceed the maximum density calculation as defined in subsection 13.78.040D1 of this chapter. The calculation of planned unit development density may include open space that is provided as an amenity to the planned unit development. Public or private roadways located within or abutting a planned unit development shall not be included in the planned unit development area for the purpose of calculating density except as allowed by section 15.28.020 of this code. (Ord. 2015-02, 2-5-2015)