(A) Every Final Plat shall be prepared by a land surveyor registered in the State of Illinois and drawn with waterproof black ink on new mylar or other material of similar durability.
(B) Said plat shall be at any scale necessary for clarity, preferably no smaller than one (1) inch equals one hundred (100) feet, provided the resultant drawing does not exceed thirty (30) inches by thirty-six (36) inches, and shall provide all of the following information:
(1) Identification as a "Final Plat" and name the proposed subdivision;
(2) North arrow, graphic scale, and data;
(3) The names, addresses and phone numbers of the Subdivider/Developer, owner, and land surveyor who prepared the plat;
(4) Accurate metes and bounds or other adequate legal description of the tract;
(5) Accurate boundary lines, with dimension and bearing or angles which provide a survey of the tract, closing with an error of closure of not more than one (1) foot in ten thousand (10,000) feet;
(6) Locations of all monuments;
(7) Reference to recorded plats of adjoining platted land by record name, plat book a page number;
(8) Accurate locations and names of all existing streets intersecting the boundaries of the subdivision;
(9) Right-of-way lines of all streets, other right-of-way, easements, and lot lines with accurate dimensions, angles, or bearing and curve data, including, radii, arcs or chords, points of tangency, and central angles;
(10) Name and right-of-way width of every proposed street;
(11) Location, dimensions and purpose of any existing or proposed easements;
(12) Number of each lot, lot dimensions, and area in square feet;
(13) Addresses for each lot as approved by the 911 Coordinator and illustrated within an oval, provided that on any corner or through lot, each possible address shall be illustrated at the appropriate street frontage;
(14) Building or setback lines with accurate dimensions;
(15) Location(s) and purpose(s) for any sites, other than private lots, that are reserved;
(16) Locations of all existing and proposed utilities; and
(17) An index should two or more sheets be used.
(C) As a separate supporting document, the Subdivider/Developer shall submit written restrictions of all types, which will run with the land and become covenants in the deeds of lots.
(D) As a separate supporting document, the Subdivider/Developer shall also submit a completed "Final Plat Checklist", (Exhibit 34-4-E3) signed by both the developer and the engineer or surveyor who prepared the plat.
(E) As another separate supporting document, the Subdivider/Developer shall submit a completed "Certification of Agency Approval" form (Exhibit 34-4-E4), signed by a professional engineer or land surveyor, registered in the State of Illinois, and certifying that the following agencies were properly notified of the subdivision/development, as required, and that each has provided a "sign- off” for the development to proceed:
(1) The Illinois Historic Preservation Agency (HPA - Archeological);
(2) The Illinois Department of Natural Resources (IDNR - Endangered Species);
(3) The Illinois Department of Natural Resources Division of Water Resources (IDNR DWR - Stream Hydraulics);
(4) The Soil Conservation Service (SCS - Land Use);
(5) The U.S. Army Corps of Engineers (USACE - Clean Water Act /Stream Hydraulics);