The Final Plat shall be legibly drawn in waterproof ink, on tracing mylar or other approved material of equal permanence. It shall be drawn at a scale no less than 100 feet to the inch, and shall be one (1) or more sheets 18 X 24 inches in size. If more than one (1) sheet is needed, each sheet shall be numbered and the relation of one sheet to another clearly shown. The Final Plat may be submitted in phases or sections of development, or in its entirety, provided that the Final Plat meets all other requirements of this Chapter.
The Final Plat shall include all information as outlined in Section 1109.06 of the Planning and Zoning Code for Final Site Plans, for the particular phase or section that is being submitted for review and approval. The Village Engineer, Community Development Coordinator, and any other Village officials, may require additional information as necessary for the review and approval of the Final Plat. This additional information includes, but is not limited to, the following:
(a) The name of the subdivision, north arrow, scale, and date.
(b) The names of all adjoining property owners and/or subdivisions as shown on record property records.
(c) The boundary lines of the area being subdivided with accurate distance and bearings including section, range, corporation, township, county, and other survey lines.
(d) Accurate locations and dimensions for all lots and reserve parcels with the acreage noted for each.
(e) Location of setback lines from all rights-of-way, public or private, and the building envelope shown on all irregular lots.
(f) Accurate locations and dimensions for all rights-of-way and all utility, water course, drainage, and other easements.
(g) Approved street names, their locations, and street curve data including the radii, arcs, chords, chord bearings, tangent and central angle.
(h) Each major subdivision will have at least one (1) permanent reference survey & elevation monument installed.
(i) Certification by a registered surveyor that the information contained on the Final Plat is true and correct and conforms to the requirements of these Subdivision Regulations.
(j) A signature approval block for the Mayor, Village Administrator, Village Engineer, Fire Chief, and Community Development Coordinator. The following language is required under the approval block: "The signatures above signify only concurrence with the general purposes and general location of this project. All technical details remain the responsibility of the Engineer preparing the plans.
(Ord. 19-20. Passed 11-4-20.)