§ 27-401. General Dimensional Requirements.
   1.   The regulations for each District pertaining to minimum land or lot area, minimum lot area per dwelling unit, minimum lot width and minimum required yards shall be as specified in § 27-402, subject to any further applicable dimensional requirements or exemptions specified elsewhere in the Chapter.
   2.   The minimum lot area specified in § 27-402 is based upon the availability of a centralized water supply system and a centralized sewage disposal system. If these systems are not available to serve a proposed use, the applicable standards of the Pennsylvania Department of Environmental Protection shall be used in determining lot size.
   3.   Measurements of minimum land area and yards pursuant to § 27-402 shall not include any land within the right-of-way of any existing or proposed street.
   4.   A lot in any particular zoning district may be used for more than one use, provided that the uses are permitted uses in that district. In such case, the greatest minimum lot or land area; lot width, yard requirements, and the smallest maximum building coverage and maximum lot coverage applicable to any of the uses shall apply to the entire lot. Parking requirements shall be cumulative. Total signs allowed shall be no more than the maximum allowed for any one of the uses on the premises; provided, however, where the size of a sign is restricted by the area of the face of a building, the total area may be considered notwithstanding its occupancy by more than one use. No requirement of the zoning ordinance shall become less restrictive for any use of a lot by reason of another use being upon the same lot.
(Ord. 45, Z-§ 401, 5/12/76; as amended by Ord. 114, § 3, 3/10/82)