The lot design (frontage, setback and coverage) and building design (height) requirements are established in each zoning district regulation below. Each district includes an illustration of the design regulations. To the extent that there is any inconsistency between the illustration and written regulations in each district, the written regulations govern. Specific rules of interpretation and exceptions to the zoning district design regulations are as set forth in the design standards (§ 153.0976 of this chapter). A summary of the dimensional regulations is provided in Table 153.0203(A) below for the convenience of the reader. To the extent of any inconsistency between the summary provided in Table 153.0203(A) below and the zoning district regulations, the zoning district regulations control.
Zoning District | RP | RE | NS | NU | O | CN | CG | CL | D | IL | IH |
Density (maximum, dwelling units per gross acre) | 0.1 | 1 | 2 | 9 | - | - | - | - | - | - | - |
Front setback (minimum, feet) | 30 | 30 | 20 | 10 | 0 | 0 | 5 | 20 | 0 | 20 | 20 |
Frontage (minimum, feet) | - | 100 | 65 | 30 | 50 | 10-150 | 40 | 50 | - | 50 | 100 |
Height (maximum, feet) | 35 | 35 | 35 | 35 | 48 | 35 | 48 | 48 | 150 | 50 | 60 |
Lot coverage (percent) | 5-15 | 15 | 15 | 40 | 50 | 70 | 80 | 70 | - | 70 | 80 |
Lot size (minimum, square feet) | 10 acres | 43,560 | 20,000 | 5,000 | - | - | - | - | - | - | - |
Lot width (maximum, feet) | - | - | - | 150 | - | - | - | - | - | - | 100 |
Lot width (minimum, feet) | - | 100 | 65 | 45 | 50 | - | - | - | - | 50 | 50 |
Maximum building size (aggregate) | - | - | - | - | 30,000 | 20,000 | - | - | - | - | - |
Maximum front building facade (individual) | - | - | - | - | 3,000 | 2,000 | - | - | - | - | - |
Maximum front setback (maximum, feet) | - | - | - | 35 | 35 | 20 | 100 | - | 20 | - | - |
Rear setback (minimum, feet) | - | 30 | 20 | 20 | 30 | 30 | 30 | 30 | - | 30 | 50 |
Side setback (minimum, feet) | 15 | 15 | 5 | 5 | 20 | 0 | - | - | - | 20 | 50 |
Stories (maximum) | 2-1/2 | 2-1/2 | 2-1/2 | 2-1/2 | 4 | 2-1/2 | 4 | 4 | 15 | 5 | 5 |
NOTES TO TABLE: RP = Resource Protection; RE = Residential Estate; NS = Neighborhood Suburban; NU = Neighborhood Urban; O = Office; CN = Commercial Neighborhood; CG = Commercial General; CL = Commercial Large-Scale; D = Downtown; IL = Industrial Light; and IH = Industrial Heavy. A dash (“-”) means that the standard does not apply. | |||||||||||
(Ord. 3020, passed 9-10-2013, § 3.12)