Drawing standards refer to drawings presented in model space. Line type and line width on paper space drawings shall match model space drawings as presented.
Examples:
(1) Subdivision Boundary – The outer boundary line of the subdivision. Layer Name: Subdivision Boundary.
The boundary shall be drawn equal to an Auto CAD line weight of 1.00mm and shall be a solid line.
(2) New Easements – Easements dedicated with this plat. Layer Name: New Easements.
Easements shall be drawn equal to an Auto CAD line weight of 0.30mm and shall be a dashed line.
(3) Existing Easements – Easements dedicated prior to this plat. Layer Name: Existing Easements.
Existing easements shall be drawn equal to an Auto CAD line weight 0.18mm and shall be a dashed line.
(4) Lot Line – New lot lines. Layer Name: New lot lines.
New lot lines shall be drawn in AutoCAD line weight of 0.30mm and shall be a solid line.
(5) Measurements – Distance, angles, bearings. Layer Name: Measurements or Dimension
Measurements shall be shown with distance, angle, and bearings on all lot lines where allowable. In a case of large subdivision plats, distance, angle and bearings shall be shown along the centerline on existing and new easement.
Text fonts, size and placement shall be readable, legible and clear.
(6) Adjacent Properties
Surrounding property lines, subdivision, undeveloped ground, right of way, easements, section lines or quarter section lines shall be drawn in AutoCAD line weight of 0.18mm and shall be dashed or dash dot. Subdivisions adjacent shall also show subdivision names, lot numbers, block numbers.
Note: Subdivision plats plotted on Mylar shall have no gray tone lines.
(7) All plats and revised plats submitted shall include a schedule of revisions showing the time and date of the original drawing and subsequent revisions.
(8) Hall County Register of Deeds.
A space shall be reserved on the subdivision plat for the register of deeds stamp; a space shall be 6”x3”.
All notary stamps must be clear, complete and readable when reproduced. All signatures must be clear, complete and readable when reproduced.
All dates and signatures must agree with the dates and signatures in the acknowledgements. (the acknowledgement must state the exact name that was signed.)
A paper copy of the subdivision plat shall be presented to the Register of Deeds offices for review at the time copies are presented to the Regional Planning department for review.
Names and titles in acknowledgements must be identical to the signatures and titles of the parties who sign. (acknowledgments must include the marital status of individuals and/or position or title for persons signing on behalf of partnerships, corporations or limited liability corporations).
(Added by Ord. No. 9081, effective 10-25-2006)