A. Every motor vehicle when operated upon a highway shall be equipped with brakes adequate to control the movement of and to stop and to hold such vehicle, including two separate means of applying the brakes, each of which means shall be effective to apply the brakes to at least two wheels and so constructed that no part which is liable to failure shall be common to the two, except that a motorcycle shall be required to be equipped with only one brake. All such brakes shall be maintained at all times in good working order.
B. It shall be unlawful for any owner or operator of any motor vehicle, other than a motorcycle, to operate such motor vehicle upon a highway unless the brake equipment thereon qualifies with regard to maximum stopping distances from a speed of twenty miles per hour on dry asphalt or concrete pavement free from loose materials as follows:
1. Two-wheel brakes, maximum stopping distance, forty feet;
2. Four or more wheel brakes, vehicles up to seven thousand pounds gross weight, maximum stopping distance, thirty feet;
3. Four or more wheel brakes, vehicles seven thousand pounds or more gross weight, maximum stopping distance, thirty-five feet;
4. All hand, parking, or emergency brakes, vehicles up to seven thousand pounds gross weight, maximum stopping distance, fifty-five feet; and
5. All hand, parking, or emergency brakes, vehicles seven thousand pounds or more gross weight, maximum stopping distance, sixty-five feet.
C. All braking distance specified in this section shall apply to all vehicles whether unloaded or loaded to the maximum capacity permitted by law.
D. The retarding force of one side of the vehicle shall not exceed the retarding force on the opposite side so as to prevent the vehicle stopping in a straight line.
E. For purposed of this section, motorcycle does not include an autocycle.
HISTORY
Amended by Ord. 9962 on 2/14/2024