1173.05 ARCHITECTURAL FEATURES .

   Cornices, canopies, eaves, pilasters, sills or other architectural features may project into a front, side or rear yard not more than three (3) feet.

(Ord. 2009-85. Passed 12-8-09.)

1173.06 HEIGHT .

   Height regulations specified in the various zoning districts shall not apply to chimneys, steeples, spires, or similar structures attached to and appropriate with the primary structure, provided the height of all such structures shall not constitute a hazard to the safe landing and takeoff of aircraft from an established airport.

(Ord. 2009-85. Passed 12-8-09.)

1173.07 MINIMUM FLOOR AREA REQUIREMENTS .

   Minimum floor area requirements as specified in the various zoning districts shall not include basements, open porches or decks with no roof, or outdoor living areas, garages, breezeways or steps.

(Ord. 2009-85. Passed 12-8-09.)

1173.08 CURB CUTS .

   (a)   R Districts. Curb cuts in R Districts shall be located not less than thirty-five (35) feet from any street intersection, as measured from the right-of-way line. If more than one (1) curb cut is proposed on a single lot, the applicant for a zoning certificate on such property shall demonstrate that such additional curb cut is necessary for safe vehicular movement to and from the site and that the distance between the curb cuts is sufficient to allow for the safe and efficient ingress and egress of vehicular traffic from the site.

   (b)   LC, GC, GI and IP Districts. Not more than two (2) curb cuts per street frontage shall be established for any single lot in the above districts. All new curb cuts must be located not less than 150 feet from any street intersection and fifty (50) feet from any adjacent property line. In addition, the applicant for a zoning certificate on such property shall demonstrate that the distance between the curb cuts is sufficient to allow for the safe and efficient ingress and egress of vehicular traffic from the site.

(Ord. 2009-85. Passed 12-8-09.)