(A) Monuments and markers shall be placed so that the center of the pipe or marked point shall coincide exactly with the intersection of lines to be marked and shall be set so that the top of the monument or marker is level with the finished grade.
(B) Monuments shall be set as follows.
(1) At the intersection of lines forming angles in the boundary of the subdivision, provided that not more than eight monuments shall be required.
(2) At the intersection of street property lines. Not more than one monument shall be required at an intersection.
(C) Markers shall be set as follows.
(1) At the beginning and ending of all curves along street property lines.
(2) At all points where lot lines intersect curves, either front or rear.
(3) At all angles in property lines of lots.
(4) At all other lot corners not established by a monument.
(D) Monuments shall be of stone, precast concrete, or concrete poured in place with minimum dimensions of six inches by six inches by 36 inches, set vertically in place with an iron or copper dowel 3/8 inch in diameter, at least 2-1/2 inches in length embedded so that the top of the dowel shall be not more than 1/4 inch above the surface and at the center of the monument. Markers shall consist of galvanized or wrought iron pipe or iron or steel bars at least three feet in length, and not less than 5/8 inch in diameter.
(Ord. CO-67-5, passed 2-21-67) Penalty, see § 10.99