It is unlawful for any engine or train to travel within or through the city limits outside the following guidelines:
1. Loaded unit coal trains must not exceed thirty-five (35) miles per hour;
2. Trains handling thirty (30) or more loads of grain, rock and/or ballast must not exceed thirty-five (35) miles per hour;
3. Trains handling Derricks 1040 and 1041, Pile Driver 1031 and Scale Test Car 77 must not exceed forty (40) miles per hour;
4. Trains handling Derrick 1042 must not exceed ten (10) miles per hour;
5. All engine servicing tracks -- movements must not exceed five (5) miles per hour;
6. Trains handling placarded tank cars of 112-A and 114-A types loaded with anhydrous ammonia, chlorine, or any compressed flammable gas will observe the following instructions:
a. Where maximum authorized speed is fifty (50) miles per hour, do not exceed forty (40) miles per hour; or
b. Where maximum authorized speed is forty (40) miles per hour, do not exceed thirty (30) miles per hour;
7. Trains having six-axle locomotive unit(s) in their engine are restricted to five (5) miles per hour less than the speed shown for freight trains on curves having permanent speed restriction signs until the locomotive units are around the curve(s).
(Ord. No. 84-8-1, 8/6/84)