A. Parking areas shall be designed so that each motor vehicle may proceed to and from the parking space provided without requiring the movement of another motor vehicle.
B. The width of entrance and exit drives shall be a minimum of twelve (12) feet for one-way use only and a minimum of twenty (20) feet for two-way use.
C. Off-street parking requirements for various uses shall conform to Chapter 1175, except as approved by the Planning Commission. The Commission, upon request, may vary the number of spaces required.
D. All parking spaces and service drives shall be improved with bituminous concrete, Portland cement concrete or equivalent surfacing and so graded and drained as to dispose of all surface water accumulation within the area.
E. No less than twenty (20) feet of open space shall be provided between any principal building and the curb line of any surface parking area or access drive.
F. The curb line of any surface parking area or access drive shall be at least five (5) feet from any exterior lot line.
G. All dead-end parking lots shall be designed to provide a sufficient back-up area for the end stall.
(Ord. 98-176. Passed 8-3-98.)