The final plat shall contain:
(a) The boundary of the plat, with accurate distances and bearings, and its acreage.
(b) The exact location and width of all streets, alleys and crosswalks within adjoining plat.
(c) The true bearings and distances to the nearest established street lines, political subdivision boundaries, section or patent corners, or other official monuments.
(d) The names of streets within and adjoining the plat.
(e) The lengths of all street centerline curves, radii, internal angles, points of curvature and tangent bearings. A note should state whether distances shown are measured along the chords or the arcs of curves.
(f) All easements for rights of way provided for public services or utilities, and any limitations of the easements.
(g) All lot numbers and lines, with accurate dimensions in feet and hundredths, and with bearings or angles related to street, alley or crosswalk lines. In case of replatting the reassignment or deletion of lot numbers, block numbers or name of original plat shall be shown in a manner satisfactory to the County Recorder.
(h) Accurate description of location, material and sizes of all monuments. Monuments should normally be shown at all angle points in the boundary, at all points of tangency and curvature, and at all intersection of streets with streets and boundary. The distances, bearings and curve data between them shall be marked on the plat.
(i) Accurate outlines of any areas to be dedicated for public use, with the purpose indicated thereon, and of any area to be reserved by deed covenant for common use of all property owners in the subdivision.
(j) The building setback lines, shown graphically along all streets, with dimensions.
(Ord. 1955-5. Passed 3-1-55.)