(A) Purpose. The purpose of the Downtown Mixed Use District is to provide for retail and service outlets and higher density residential units in the downtown area of the City. When a reference is made to the B-1 District it applies to both the B-1A and B-1B Districts.
(B) Permitted uses. Permitted uses in this District include:
(1) All uses permitted within the B-1A District;
(2) Apartments; and
(3) Townhomes.
(C) Accessory uses. Permitted accessory uses in a B-1B District are those commercial or business buildings and structures accessory to the principal use. The accessory uses shall not exceed 30% of the gross floor space of the principal use.
(D) Conditional uses.
(1) Conditional uses in this District are subject to the following requirements:
(a) A conditional use permit is applied for based on procedures set forth in § 154.022 of this chapter;
(b) Screening from abutting residential uses and landscaping in compliance with § 154.071 of this chapter shall be required;
(c) Off-street parking is provided in compliance with § 154.067 of this chapter; and
(d) Any other conditions deemed to be necessary to reduce possible adverse impacts by the development, as determined by the Planning Commission or City Council.
(2) Conditional uses in this District include:
(a) Commercial developments undertaken by two or more property owners in which the extension of an existing structure is proposed or a structure spans more than one lot. Side yards shall not be required in these cases unless the side yard abuts residentially zoned property or a public road. Side yard requirements specified below shall apply in these areas;
(b) Governmental and public regulated utility buildings and structures necessary for the health, safety and general welfare of the community; and
(c) Production of art and craft products and on-premises retail sales of those products and related products.
(E) Performance standards. The following minimum requirements shall be observed in a B-1B District:
(1) Lot width: 75 feet;
(2) Setbacks for all yards: 25 feet where abutting a residential district, otherwise there is no minimum setback, a permissible zero-lot-line setback, and a ten-foot maximum setback to a public right-of-way;
(3) Maximum size: 25,000 square feet for any retail building in this District; and
(4) Signs: (See also § 154.071 of this chapter) the aggregate square footage of sign space per lot shall not exceed the greater of one and one-half square feet per lineal foot of effective building frontage; or 10% of the gross area of the effective front face of the building to the height of the eave line or top of parapet, not to exceed 20 feet. This limitation shall include pylon or freestanding signs; except that, the sign areas shall be computed on the basis of the area of one side, if both sides are the same. EFFECTIVE BUILDING FRONTAGE is the length of the face of the building parallel to the lot frontage, or as projected to a line parallel to the lot frontage. The lot frontage is that side of the building which includes the main entry of the building.
(5) Impervious surface maximum: 90%.
(F) Interim uses. The following are interim uses in a B-1B District and require an interim use permit based upon procedures set forth in and regulated by § 154.026 of this chapter.
(Ord. 2023-03, passed 5-22-2023, § 17)