Table 19.104.140 sets forth the rules, regulations and processing applicable to permanent wall signs.
Use/ zoning | Number | Size | Location | Review Authority | Review Criteria | |
Allowed area and length | Max. Area | |||||
Commercial & Industrial | • One sign per business with exterior frontage • One additional for: - Businesses with no ground sign and adjacent to more than one street or shopping center driveway. - Sign directed to interior of project and not visible from any public right- of-way. - Single tenant building pad with more than 5,000 s.f. | • 1 s.f. per linerar ft of store frontage on which sign is located. • 70% of store frontage maximum • Length = total combined length of each row of sign copy • Minimum area = 20 s.f. | 200 s.f. | • No more than one wall sign per frontage • Shall not project above the roof or top of parapet, unless it is an integral part of the face of an architectural projection. • No projecting wall sign shall extend into a public right-of-way more than twelve inches. Any projecting sign shall have a vertical clearance of at least fifteen feet above a private or public vehicular roadway, alley, driveway or parking area, and at least eight feet above a sidewalk, pedestrian mall or landscaped area. | CDD | Meets Design Criteria in Section 19.104.220 |
Office & Institutional | • One sign per business with exterior frontage • One additional for: - Businesses with no ground sign and adjacent to more than one street or major shopping center driveway. - Sign directed to interior of project and not visible from any public right- of-way. | • 1 s.f. per linear ft. of business frontage on which sign is located. • 70% of business frontage maximum • Length = total combined length of each row of copy | 40 s.f. | Same as above | CDD | Same as above |
CDD - Community Development Director; PC - Planning Commission; s.f. = square feet; ft = feet |
(Ord. 23-2247, § 1 (part), 2023; Ord. 2085, § 2 (part), 2011)