A. The lot size, width, depth, shape and orientation shall be appropriate for the location of the subdivision and for the type of development and use contemplated, and in compliance with all applicable City zoning requirements.
B. Lot dimensions and areas shall conform to the requirements of the applicable City zoning ordinance. However,
1. Lots abutting a watercourse, drainage way, channel or stream shall have a minimum width or depth as required to provide an adequate building site and to afford the minimum usable area required in this Title or the applicable City flood control and zoning requirements for front, rear and side yards.
2. Depths and widths of lots or properties reserved or laid out for commercial, business or industrial purposes shall be adequate to provide for the off-street service and parking facilities required by the applicable City zoning requirements.
C. On all corner lots there shall be maintained not less than the minimum building setback line on both streets.
D. All lots shall abut on a publicly dedicated street.
E. Double-frontage and reverse-frontage lots shall be avoided except where essential to provide separation of residential development from highways or primary thoroughfares or to overcome specific disadvantages of topography and orientation. A planted screen easement of at least ten feet (10'), and across which there shall be no right of vehicular access, shall be provided along the rear lot lines of lots abutting such highways and primary thoroughfares.
F. Side lot lines shall be substantially at right angles or radial to street lines. (Ord. 92-14-0, 3-25-92)