1125.01 M-1 INDUSTRIAL DISTRICT.
   (a)   Statement of Intent. The M-1 Industrial District is designed to accommodate all industrial uses in the fields of manufacturing, processing, and fabricating. The M-1 District is regulated to be exclusively used for industrial purposes free from encroachment by residential or business development. All industrial uses shall be required to adhere to all applicable state, county, and local permit requirements. No land or structure shall be used or occupied in any manner so as to create any dangerous, injurious, noxious, or otherwise objectionable fire, explosive, or other hazard; noise or vibration, smoke, dust, odor, or other substandard condition or element; in such a manner or in such amount as to adversely affect the surrounding area, provided that any use permitted may be established and maintained if it conforms to the provisions of this article.
(Ord. 33-82. Passed 2-22-82.)
M-1 INDUSTRIAL DISTRICT
MINIMUM ZONING LOT REQUIREMENTS
MAX. HEIGHT (Ft.)
FOOT- NOTES
MAXIMUM PERCENTAGE OF LOT COVERED BY BUILDING
YARD REQUIREMENTS (Ft.)
FRONT
SIDE
REAR
LEAST WIDTH
SUM OF BOTH
PRINCIPAL PERMITTED USES:
1.   Industrial and manufacturing establishments
50
50
20
40
50
1,2
2. Warehouses
50
50
20
40
50
1,2
3. Wholesale establishments
50
50
20
40
50
1,2
4. Building materials, sales and storage facilities
50
50
20
40
50
1,2
5. Office parks
50
100
20
40
50
1,2
6. Essential services
--
1
7. Public uses
--
1
8. Public service facilities
1
9. Radio and television buildings and transmitting towers
50
20
40
50
1,2
CONDITIONALLY PERMITTED USES
1. Automotive wrecking yards
--
1,2,3
2. Junk and salvage yards
1,2,3
3. Resource and mineral extraction
1,2,3
4. Solid waste facilities
-
1,2,3
5. Establishments using hazardous waste materials
1,2,3
NOTE:Sign regulations and off-street parking and loading requirements specified in Section 1133.05 and Section 1133.06, respectively.
1.   A front yard of seventy-five (75) feet, a side yard of forty (40) feet, and a rear yard of one hundred (100) feet shall be required between the principal building within an M-1 District and the lot line of any lot within an “R” District.
2.   Subject to performance standards specified in Section 1125.02.
3.   See Section 1137.07 for requirements for conditional uses.
   (Ord. 33-82. Passed 2-22-82.)