All measurements, tests and analyses of the characteristics of industrial wastes shall be determined in accordance with EPA approved methods published in the latest edition of Standard Methods for the Examination of Water and Wastewater published by the American Health Association and American Water Works Association or Methods for Chemical Analysis of Water and Wastes published by the Environmental Monitoring and Support Laboratory, Office of Research and Development, U.S. Environmental Protection Agency and shall be determined at the monitoring facilities or from samples taken at the monitoring facilities. In the event no special monitoring facility has been installed, the sampling shall be done at the nearest downstream manhole in the public sewers to the point at which the building lateral sewer is connected. Sampling shall be carried out by customarily accepted methods to reflect the effects of waste constituents upon the wastewater treatment works and to determine the existence of possible hazards to life, limb and property.
(Prior Code, § 51.141) (Ord. 2270, passed 6-17-1972; Ord. 03-39, passed 11-17-2003) Penalty, see § 51.999