(a) R Districts. Curb cuts in R Districts for properties not abutting a public alley on a collector or arterial street shall be located more than fifty (50) feet of any street intersection, as measured from the nearest right-of-way line of the intersecting street. If more than one (1) curb cut is proposed on a single lot, the applicant for a zoning certificate on such property shall demonstrate that such additional curb cut is necessary for safe vehicular movement to and from the site and that the distance between the curb cuts is sufficient to allow for the safe and efficient ingress and egress of vehicular traffic from the site.
(b) LC, GC, RC, GI, IR and IP Districts. All new curb cuts must be located more than 150 feet from any street intersection and fifty (50) feet from any adjacent property line. Notwithstanding the above, if the curb cut is located on a street classified as an arterial or collector street, the location of the curb cut shall be subject to specific approval by the City Engineer. In such cases, the City Engineer shall utilize the standards and requirements of the Ohio Department of Transportation Access Management Manual, as may be amended. In addition, the applicant for a zoning certificate on such property shall demonstrate that the distance between the curb cuts is sufficient to allow for the safe and efficient ingress and egress of vehicular traffic from the site. (Ord. 27-11. Passed 3-14-11.)