A final plat shall be drawn to a scale of one (1) inch to one hundred feet, capable of printing on sheet or sheets 24"X 36" in size, or other size and scale as determined appropriate by the City Engineer. All drawings shall be submitted in AutoCAD format and as TIFF images or other format as approved by the City Engineer. The final plat shall contain the following items:
(a) Name of the subdivision and the section number, if it is a portion of the total subdivision.
(b) A legal description including parcel identification number and property owner's name.
(c) All required certifications and approvals.
(d) Requested covenants and/or deed restrictions.
(e) Sheet and total number for each sheet, including covenant sheet and construction plan.
(f) Scale and north indicator.
(g) The bearings and distances of the boundary lines of the subdivision.
(h) The bearings and distances of all lot lines or areas dedicated to public uses within the subdivision. In case of curved sides of lots, the tangent deflection angle, the length of the tangent, the length of radius, the length of arc and the length and bearing of the chord shall be given.
(i) Lot numbers.
(j) The bearing and distances of all straight sections of street center lines. Curved sections of street center lines shall show the same information as curved lot lines.
(k) Street names so as to not duplicate the name of any current street name in the City.
(l) Street, alley and easement widths. Any easements not parallel to property lines shall show the bearings and distances of the lines.
(m) The location of all permanent markers or monuments.
(n) Building setback lines with their distance from the right-of-way lines.
(o) The proposed location of all utilities and easements, including dimensions.
(p) Certification of engineering data on the plat by a Professional Engineer or Surveyor.
(q) All of the above, including any additional requirements as may be cited by the Ross County Auditor or Recorder.
(Ord. 27-11. Passed 3-14-11.)