(a) Buildings and land in the S Special District shall comply with the requirements of Schedule 1131.05:
Special District Lot Standards (c) | |
S Special District | |
(1) Minimum Lot Area | 2 acres |
(2) Minimum Lot Width at building setback line (a) | 200 feet |
(3) Minimum Building Setback: | |
A. Front Setback (b) | 60 feet |
B. Side Setback | 60 feet |
C. Rear Setback | 60 feet |
(4) Minimum Parking Lot Setback from: | |
A. Right-of-way | 60 feet |
B. Side and rear project boundary lines abutting an R-1, R-2, R-3, R3CPE, or R-4 District | 20 feet |
C. Side and rear project boundary line abutting another district or property. | 10 feet |
(5) Maximum lot coverage by buildings | 10% |
(6) Maximum Height: principal structures (d) | 35 feet |
(7) Maximum Height: accessory structures (d) | 20 feet |
Note: (a) On curved streets, the lot width shall be the arc length of the building setback line. (b) The minimum building setback on non dedicated streets shall be 90 feet from the street centerline. (c) See Chapter 1145 for minimum lot standards for conditional and P* uses. (d) See Chapter 1147 for exceptions to height standards. | |
(b) Side Setbacks for Corner Lots. The following setback requirements apply to a corner lot. See Figure 1131.05 below.
(1) Street Side Setback. A new building or building addition on a corner lot shall comply with the following street side setback requirements:
A. The street side setback of abutting corner lots with coinciding rear lot lines shall be the greater of:
i. The corner side setback of existing buildings or structures on the abutting corner lot; or
B. The interior side setback of an interior lot shall comply with the requirements for side setback of Schedule 1131.05.
(2) Interior Side Setback. The minimum side setback of the interior side lot line shall comply with the Schedule in 1131.05.
(Ord. 3273. Passed 5-9-24.)