A. Compliance with design requirements. All parking spaces provided for any use shall meet these design requirements, in addition to parking requirements for specific uses set forth in other Articles of this Chapter.
B. Parking dimensions. All parking spaces provided for any use shall meet the dimension requirements found in Table 17.56.040. Further clarification about required parking space dimensions is provided in Figures A-C.
Angle | Width Standard | Width Handicapped | Length Standard | Length ADA Accessible | Aisle Width 1-Way | Aisle Width 2-Way |
90 degrees | 9' | 13' | 18' | 18' | N/A | 25' |
75 degrees | 9' | 13' | 20' | 20' | 16' | 20' |
60 degrees | 9' | 13' | 20' | 21' | 16' | 20' |
45 degrees | 9' | 13' | 21' | 21' | 16' | 20' |
30 degrees | 9' | 13' | 17' | 18' | 12' | 20' |
0 degrees (parallel) | 10' | 10' | 22' | 22' | 12' | 20' |
Note: In cases where a drive aisle is also functioning as a fire lane it shall have a minimum width of 20'.
Figure A. Typical 90-degree parking space assemblies
Figure B. Typical 30-45-60-75-degree parking space assemblies
Figure C. Typical parallel parking assemblies
(Ord. 1397.17.59, 2022)